Viewing Active Ip Interfaces; Viewing Device Information - AudioCodes mediapack MP-500 User Manual

SIP User's Manual
3.6.1.3

Viewing Active IP Interfaces

The 'IP Interface Status' page displays the device's active IP interfaces, which are
configured in the 'Multiple Interface Table' page (refer to ''Configuring the Multiple Interface
Table'' on page 58).
To view the 'Active IP Interfaces' page:
Open the 'IP Interface Status' page (Status & Diagnostics tab > Status &
Diagnostics menu > IP Interface Status page item).
3.6.1.4

Viewing Device Information

The 'Device Information' page displays the device's specific hardware and software product
information. This information can help you expedite troubleshooting. Capture the page and
e-mail it to AudioCodes Technical Support personnel to ensure quick diagnosis and
effective corrective action. This page also displays any loaded files used by the device
(stored in the RAM) and allows you to remove them.
To access the 'Device Information' page:
Open the 'Device Information' page (Status & Diagnostics tab > Status &
Diagnostics menu > Device Information page item).
The 'Board Type' field number depicts the following device: MP-500 MSBG = 69
To delete a loaded file:
Click the Delete button corresponding to the file that you want to delete. Deleting a file
takes effect only after device reset (refer to ''Resetting the Device'' on page 235).
Version 5.8
Figure 3-194: IP Interface Status Page
Figure 3-195: Device Information Page
249
3. Web-Based Management
October 2009