D-Link xStack DGS-3620 Reference Manual page 1326

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
swCFMExtLockOccurred
swCFMExtLockCleared
Port Trap linkUp
linkDown
DDM swDdmAlarmTrap
swDdmWarningTrap
External Alarm swExternalAlarm
swExternalAlarmStacking
DOS Attack
swDoSAttackDetected
Prevention
System
coldStart
warmStart
Power Status swPowerStatusChg
A notification is generated when local MEP
enters lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP
exits lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when port
linkup.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
(3) ifOperStatu
A notification is generated when port
linkdown.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
(3) ifOperStatu
The trap is sent when any parameter value
exceeds the alarm threshold value or
recovers to normal status depending on
the configuration of the trap action.
Binding objects:
(1) swDdmPort
(2) swDdmThresholdType
(3) swDdmThresholdExceedType
(4) swDdmThresholdExceedOrRecover
The trap is sent when any parameter value
exceeds the warning threshold value or
recovers to normal status depending on
the configuration of the trap action.
Binding objects:
(1) swDdmPort
(2) swDdmThresholdType
(3) swDdmThresholdExceedType
(4) swDdmThresholdExceedOrRecover
When external alarm Occurred.
Binding objects:
(1) swExternalAlarmChannel
(2) swExternalAlarmMessage
When external alarm Occurred.
Binding objects:
(1) swExternalAlarmStackingUnit
(2) swExternalAlarmStackingChannel
(3) swExternalAlarmStackingMessage
This trap is sent when the specific DoS
packet is received and trap is enabled.
Binding objects:
(1) swDoSCtrlType
(2) swDoSNotifyVarIpAddr
(3) swDoSNotifyVarPortNumber
A coldStart trap signifies that the SNMPv2
entity, acting in an agent role, is
reinitializing itself and that its configuration
may have been altered.
A warmStart trap signifies that the
SNMPv2 entity, acting in an agent role, is
reinitializing itself such that its
configuration is unaltered.
Power Status change notification.
Binding objects:
1:swPowerUnitIndex
1321
1.3.6.1.4.1.171.12.86.1
00.0.3
1.3.6.1.4.1.171.12.86.1
00.0.4
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.3
1.3.6.1.4.1.171.12.72.4.
0.1
1.3.6.1.4.1.171.12.72.4.
0.2
1.3.6.1.4.1.171.12.11.2.
2.5.0.1
1.3.6.1.4.1.171.12.11.2.
2.5.0.2
1.3.6.1.4.1.171.12.59.4.
0.1
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.4.1.171.12.11.2.
2.2.0.1