D-Link xStack DGS-3620 Reference Manual page 1302

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the
device.
link state: for ex: , 100Mbps FULL duplex
Event description: Port link down.
Log Message: Port <[unitID:]portNum> link down
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the
device.
802.1X Event description: 802.1X Authentication failure.
Log Message: 802.1X Authentication failure [for <reason> ] from
(Username: <username>, Port: <[unitID:]portNum>, MAC:
<macaddr> )
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of thr authenticated device.
Event description: 802.1X Authentication successful.
Log Message: 802.1X Authentication successful from (Username:
<username>, Port: <[unitID:]portNum>, MAC: <macaddr>)
Parameters description:
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of the authenticated device.
RADIUS Event description: VID assigned from RADIUS server after
RADIUS client is authenticated by RADIUS server
successfully .This VID will be assigned to the port and this port will
be the VLAN untagged port member.
Log Message: RADIUS server <ipaddr> assigned VID :<vlanID>
to port <[unitID:]portNum> (account :<username> )
Parameters description:
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of RADIUS assigned VLAN.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: Ingress bandwidth assigned from RADIUS
server after RADIUS client is authenticated by RADIUS server
successfully .This Ingress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned ingress
bandwith :<ingressBandwidth> to port <[unitID:]portNum>
(account : <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
ingressBandwidth: The ingress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: Egress bandwidth assigned from RADIUS
server after RADIUS client is authenticated by RADIUS server
successfully .This egress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned egress
bandwith :<egressBandwidth> to port <[unitID:]portNum>
(account: <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
egressBandwidth: The egress bandwidth of RADIUS assign.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Event description: 802.1p default priority assigned from RADIUS
server after RADIUS client is authenticated by RADIUS server
successfully. This 802.1p default priority will be assigned to the
port.
Informational
Warning
Informational
Informational
Informational
Informational
Informational
1297