D-Link xStack DGS-3620 Reference Manual page 1242

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the priority of the voice VLAN to be six:
DGS-3620-28PC:admin#config voice_vlan priority 6
Command: config voice_vlan priority 6
Success.
DGS-3620-28PC:admin#
118-4 config voice_vlan oui
Description
This command is used to configure the user-defined voice traffic's OUI. The OUI is used to identify
the voice traffic. There are a number of pre-defined OUIs. The user can further define the user-
defined OUIs if needed. The user-defined OUI cannot be the same as the pre-defined OUI. The
following are the pre-defined voice traffic's OUI:
OUI
00:E0:BB
00:03:6B
00:E0:75
00:D0:1E
00:01:E3
00:60:B9
00:0F:E2
00:09:6E
Format
config voice_vlan oui [add | delete] <macaddr> <macmask> {description <desc 32>}
Parameters
add - Specifies to add a user-defined OUI of Voice device vendor.
delete - Specifies to delete a user-defined OUI of Voice device vendor.
<macaddr> - Enter a user-defined OUI MAC address.
<macmask> - Enter a user-defined OUI MAC address mask.
description - (Optional) Specifies a description for the user-defined OUI.
<desc 32> - Enter a description for the user-defined OUI. The maximum length is 32
characters.
Vendor
3COM
Cisco
Veritel
Pingtel
Siemens
NEC/ Philips
Huawei-3COM
Avaya
1237
Mnemonic Name
3com
cisco
veritel
pingtel
siemens
nec&philips
huawei&3com
avaya