5.1 A: Initialization
7.
Press
and scroll to A1-01.
Press
to display the value set to A1-01. If the first "0" blinks, parameter settings
8.
are unlocked.
9.
Use
and
to change the value if desired. This is not typical.
Press
to save the setting, or
10.
changes.
11.
The display automatically returns to the parameter display.
Note:
Parameter settings can be edited after entering the correct password. Performing a 2-Wire or 3-Wire initialization resets the password to
"0000". Reenter the password to parameter A1-05 after drive initialization.
78
Step
to return to the previous display without saving
YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual
http://nicontrols.com
Display/Result