YASKAWA J1000 Technical Manual page 204

No. Name
Heatsink
U4-08 Displays the heatsink temperature.
Temperature
Lights all segments of the LED to verify that the display is
U4-09 LED Check
working properly.
U4-13 Peak Hold Current Displays the peak hold current during run.
<1> U1-03 and U4-13 display monitor contents in amp units. When reading the value of these monitors via MEMOBUS/Modbus, a value of 8192 is
equal to 100% of the drive rated output current.
<2> When this value reaches 100%, the maintenance period has been reached for the component in question and the drive is at risk of faulting out due
to component failure. Periodically check the maintenance monitors to avoid this situation.
YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual
Description
http://nicontrols.com
B.2 Parameter Table
Analog Output
Unit
Level
10 V: 100 °C 1 °C
No signal output avail. –
0.01 A
No signal output avail.
<1>
Addr.
Mode
Hex
O 68
O 3C
O 7CF
B
203