YASKAWA J1000 Technical Manual page 126

No.
o4-07 DC Bus Pre-charge Relay Maintenance Setting
n o4-09: IGBT Maintenance Setting
Sets the value of the IGBT maintenance time displayed in U4-07 as a percentage of the total expected performance life. This
value should be reset to 0 when the IGBTs have been replaced.
Note: The actual maintenance time depends on the environment the drive is used in.
No.
o4-09
n o4-11: U2 Initialization
When the drive is initialized, the fault history monitors (U2-oo) are not reset. Parameter o4-11 can be used to initialize them.
No.
o4-11
Setting 0: No Action
The drive keeps a record of the fault history.
Setting 1: Reset Fault Data
Resets the data for the U2-oo monitors. Once o4-11 is set to 1 and the ENTER key is pressed, the fault data are erased and
the display returns to 0.
YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual
Name
Name
IGBT Maintenance Setting
Name
U2 Initialization
http://nicontrols.com
5.9 o: Operator Related Settings
Setting Range
0 to 150%
Setting Range
0 to 150%
Setting Range
0 or 1
Default
0%
Default
0%
Default
0
5
125