YASKAWA J1000 Technical Manual page 52

Parameter
L8-01: Internal Dynamic Braking Resistor
Protection Selection
L3-04: Stall Prevention During Decel
8.
Operate the system and verify the required deceleration rate is obtained during dynamic braking or stopping.
YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual
Table 3.14 Braking Resistor Settings
0: Disabled. The drive will not provide overheat protection. Supply separate
means of overheat protection.
1: Enabled. Braking Resistor is protected from overheat.
0: Stall prevention disabled.
http://nicontrols.com
3.10 Braking Resistor
Settings
3
51