YASKAWA J1000 Technical Manual page 64

Output Frequency Display
Drive Mode
Output Current Display
Output Voltage Reference
Drive Mode
Programming
Mode
Frequency Reference
Drive Mode
n Drive Mode Details
The following actions are possible in the Drive Mode:
• Run and stop the drive.
• Monitor the operation status of the drive (frequency reference, output frequency, output current, output voltage, etc.).
• View information on an alarm.
Note: Select "Drive Mode" when running. The mode can be switched to any mode (program mode, etc.) other than drive mode while the drive is
stopped. However, the drive cannot be operated in other modes. Return the mode to "Drive Mode" after completing periodic inspection.
Figure 4.4 illustrates changing the default frequency reference of F 0.00 (0 Hz) to F 6.00 (6 Hz) while in Drive Mode. This
example assumes the drive is set to LOCAL.
YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual
Monitors the frequency output by the drive.
STOP
Monitors the output current of the drive.
STOP
Monitors the output voltage of the drive.
STOP
Monitor Display
Monitor parameters (U parameters) are displayed.
STOP
Verify Function
Lists all parameters that have been edited or changed from default settings.
Verifying Parameter Changes: Verify Menu on page
STOP
Setup
A select list of parameters necessary to get the drive operational quickly.
Setup Group within the Programming Mode on page
STOP
Parameter Setting
Allows the user to access and edit all parameter settings.
page
STOP
Returns to the frequency reference display screen.
STOP
http://nicontrols.com
4.3 The Drive and Programming Modes
187.
Refer to
66.
Refer to The
64.
Refer to Parameter List on
63
4