Ethernet Phy Status Leds - Xilinx KCU105 User Manual

Ethernet PHY Status LEDs

[Figure 1-2, callout 17]
The Ethernet PHY status LEDs are integrated into the metal frame of the P3 RJ-45 connector.
These LEDs are visible on the left edge of the KCU105 board when it is installed into a PCIe
slot in a PC chassis. The two PHY status LEDs are integrated within the frame of the RJ45
Ethernet jack as shown in
X-Ref Target - Figure 1-20
Details about the tri-mode Ethernet MAC core are provided in Tri-Mode Ethernet MAC
LogiCORE IP Product Guide (PG051)
The product brief for the Marvell M88E1111 Alaska Gigabit Ethernet Transceiver is available
on the Marvell Semiconductor website
from Marvell. The contact information is on the Marvell Semiconductor website
KCU105 Board User Guide
UG917 (v1.4) September 25, 2015
Figure 1-20.
Figure 1-20: Ethernet PHY Status LEDs
[Ref 9].
[Ref 31]. The data sheet can be obtained under NDA
www.xilinx.com
Chapter 1: KCU105 Evaluation Board Features
Send Feedback
[Ref 31].
49