Fmc Menu Options - Xilinx KCU105 User Manual

These mezzanine cards can be attached to the J22 HPC or J2 LPC expansion ports on the
KCU105 board.
Table C-3: FMC Module/Board
Xilinx FMC Module/Board
XM101
XM104
XM105
XM107
KCU105 Base Board

FMC Menu Options

KCU105 System Controller
- FMC Menu-
1. Set FMC XMxxx CLOCKS
2. Read FMC HPC IIC EEPROM
3. Read FMC LPC IIC EEPROM
4. Set FMC VADJ to 1.8V
5. Set FMC VADJ to 1.5V
6. Set FMC VADJ to 1.2V
7. Set FMC VADJ to 0.0V
0. Return to Main Menu
Select an option
Identify the FMC module types plugged on to the KCU105 board, and which FMC connector
is associated - the left J22 HPC or right J2 LPC. The examples shown in this section reflect
the particular FMC installed at the KCU105 board J22 HPC FMC connector.
KCU105 Board User Guide
UG917 (v1.4) September 25, 2015
Table C-3 shows the accessible clock resources on each FMC module.
Clock Source #1 Clock Source #2
Si570
Si570
Si570
Si570
Si570
www.xilinx.com
Appendix C: System Controller
Si570
Si5638
n/a
n/a
Si5328
Send Feedback
107