Xilinx KCU105 User Manual page 65

User PMOD GPIO Headers
[Figure 1-2, callout 34]
The KCU105 evaluation board supports two PMOD GPIO headers J52 (right-angle female)
and J53 (vertical male). The PMOD nets connected to these headers are accessed via
level-shifters U41 (PMOD0 J52) and U42 (PMOD1 J53). The level-shifters are wired to the
XCKU040 device U1 banks 44 and 45.
Figure 1-30 shows the GPIO PMOD headers J52 and J53.
X-Ref Target - Figure 1-30
Figure 1-30: PMOD Connectors J52 and J53 with Level-Shifters U42 and U43
KCU105 Board User Guide
UG917 (v1.4) September 25, 2015
Chapter 1: KCU105 Evaluation Board Features
www.xilinx.com 65
Send Feedback