Ethernet Phy Status Leds - Xilinx SP605 Hardware User's Manual

Chapter 1: SP605 Evaluation Board

Ethernet PHY Status LEDs

The Ethernet PHY status LEDs (DS11-DS13) are mounted in right-angle plastic housings to
make them visible on the connector end of the board when the SP605 board is installed into
a PC motherboard. This cluster of six LEDs is installed adjacent to the RJ45 Ethernet jack
P1.
X-Ref Target - Figure 1-13
42
Direction
Indicator
DUP
TX
RX
End view of SP605 Ethernet jack and
status LEDs when installed vertically
in a PC chassis
Figure 1-13: Ethernet PHY Status LEDs
www.xilinx.com
Link Rate
(Mbps)
10
100
1000
P1
UG526_13 _092409
SP605 Hardware User Guide
UG526 (v1.9) February 14, 2019