Table 1-12: KCU105 Board FPGA U1 to PCIe Edge P1 Connections (Cont'd)
FPGA (U1) Pin
AB6
AB5
SFP/SFP+ Module Connectors
[Figure
1-2, callout 15]
The KCU105 board hosts two small form-factor pluggable (SFP/SFP+) P4 and P5 that accept
SFP or SFP+ modules. The connectors are housed within a single dual SFP cage assembly.
The SFP transmit and receive signal data paths are routed with a differential characteristic
impedance of 100Ω (±10%) with an insertion loss of <4 dB up to 8 GHz.
Figure 1-18
shows SFP/SFP+ module connector circuitry typical of the two
implementations.
X-Ref Target - Figure 1-18
KCU105 Board User Guide
UG917 (v1.4) September 25, 2015
Schematic Net
Name
Pin Number
PCIE_CLK_QO_P
PCIE_CLK_QO_N
Figure 1-18: SFP/SFP+ Module Connector
www.xilinx.com
Chapter 1: KCU105 Evaluation Board Features
PCIe Edge P1
Pin Name
A13
REFCLK+
A14
REFCLK-
45
Send Feedback