Ethernet Phy Status Leds - Xilinx ML605 User Manual

Chapter 1: ML605 Evaluation Board

Ethernet PHY Status LEDs

The Ethernet PHY status LEDs are mounted to be visible when the ML605 board is
installed into a PC motherboard. They are mounted in right-angle, plastic housings and
can be seen on the connector end of the board. This cluster of six LEDs is installed adjacent
to the RJ45 Ethernet jack P2.
X-Ref Target - Figure 1-16
46
Direction
Indicator
DUP
TX
RX
End view of ML605 Ethernet jack and
status LEDs when installed vertically
in a PC chassis
Figure 1-16: Ethernet PHY Status LEDs
www.xilinx.com
Link Rate
(Mbps)
10
100
1000
P2
UG534_16_101209
ML605 Hardware User Guide
UG534 (v1.2.1) January 21, 2010