Installing A Pci Riser-Card Assembly - IBM System x3650 M4 BD Type 5466 Installation And Service Manual

Installing a PCI riser-card assembly

Use this information to install a PCI riser-card assembly.
About this task
To install the PCI riser-card assembly, complete the following steps:
Procedure
1. Read the safety information that begins on page "Safety" on page vii and
"Installation guidelines" on page 32.
2. Make sure that the server and all peripheral devices are turned off and that the
power cords and all external cables are disconnected.
3. Reinstall any adapters and reconnect any internal cables that you removed in
other procedures.
4. Align the PCI riser-card assembly with the alignment pin and the guide rails
on the chassis.
Figure 67. PCI riser-card assembly 1 installation
Chapter 2. Installing optional devices
81