IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 275

Attention:
v Two or more people are required to remove the system from a rack cabinet.
v To completely remove the server from the rack, press the latches on the sides
on the slide rails.
Figure 186. Half-out latch
4. Loosen the two thumbscrews that secure the cover to the chassis.
5. Press on the two blue grip points and slide the cover toward the rear; then, lift
the cover off the server. Set the cover aside.
Figure 187. Cover removal
6. If you are instructed to return the server top cover, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Chapter 6. Removing and replacing components
259