IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 188

Figure 83. Rear hard disk drive cage installation
172
System x3650 M4 BD Type 5466: Installation and Service Guide
6. Make sure the switch on the rear hard disk drive cage is in the unlock
position.
7. Rotate the cage inward until it firmly sits into place ▌3▐.
8. Close the latches on the chassis.
9. Remove the power cable that currently connects the hot-swap hard disk drive
backplane in the server to the power-paddle card.
v Type 1 - SATA