Replacing A Memory Module - IBM System x3650 M4 BD Type 5466 Installation And Service Manual

Figure 98. DIMM removal
8. If you are instructed to return the DIMM, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.

Replacing a memory module

Use this information to replace a memory module.
About this task
Notes:
v See "Memory module installation" on page 60 for notes and information that
you must consider when you install DIMMs.
v Confirm that the server supports the DIMM that you are installing, see
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/.
The following illustration shows the location of the DIMM connectors on the
system board.
Chapter 6. Removing and replacing components
187