IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 470

806f070c-2010ffff • 806f070d-0400ffff
806f070c-2010ffff Configuration Error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]. (DIMM 16)
Explanation: This message is for the use case when an implementation has detected a Memory DIMM configuration
error has been corrected.
May also be shown as 806f070c2010ffff or 0x806f070c2010ffff
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0126
SNMP Trap ID: 41
Automatically notify Support: No
User response: Make sure that DIMMs are installed and following the memory population chart in the system
publication.
806f070c-2581ffff Configuration Error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Explanation: This message is for the use case when an implementation has detected a Memory DIMM configuration
error has been corrected.
May also be shown as 806f070c2581ffff or 0x806f070c2581ffff
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0126
SNMP Trap ID: 41
Automatically notify Support: No
User response: If the specified sensor is All DIMMs or One of the DIMMs, please make sure that DIMMs are
installed and following the memory population chart in the system publication.
806f070d-0400ffff Rebuild in progress for Array in system [ComputerSystemElementName]. (Drive 0)
Explanation: This message is for the use case when an implementation has detected that an Array Rebuild is in
Progress.
May also be shown as 806f070d0400ffff or 0x806f070d0400ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0178
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
454
System x3650 M4 BD Type 5466: Installation and Service Guide