IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 250

Figure 148. Type 1 - SATA
v Type - SAS
Figure 149. Type 2 - SAS
To remove the hot-swap backplane on the rear hard disk drive cage, complete the
following steps.
Procedure
1. Read the safety information that begins on page "Safety" on page vii and
2. Turn off the server (see "Turning off the server" on page 22) and all attached
3. Remove the server top cover (see "Removing the server top cover" on page 35).
4. Remove all hot-swap hard disk drives in the rear hard disk drive cage (see
5. Lift the backplane out of the rear hard disk drive cage.
234
System x3650 M4 BD Type 5466: Installation and Service Guide
"Installation guidelines" on page 32.
peripheral devices. Disconnect all power cords; then, disconnect all external
cables from the server.
"Removing a hot-swap hard disk drive" on page 166.