IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 527

816f000d-0409ffff The Drive [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName]. (Drive 9)
Explanation: This message is for the use case when an implementation has detected a Drive has been Removed.
May also be shown as 816f000d0409ffff or 0x816f000d0409ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling the drive.
2. Make sure that the disk firmware and RAID controller and backplane firmware are at the latest level.
3. Check the SAS cable.
4. Replace the hard disk drive.
816f000d-040affff The Drive [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName]. (Drive 10)
Explanation: This message is for the use case when an implementation has detected a Drive has been Removed.
May also be shown as 816f000d040affff or 0x816f000d040affff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling the drive.
2. Make sure that the disk firmware and RAID controller and backplane firmware are at the latest level.
3. Check the SAS cable.
4. Replace the hard disk drive.
816f000d-0409ffff • 816f000d-040affff
Appendix A. Integrated management module II (IMM2) error messages
511