IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 262

Figure 169. Installation tool alignment
Figure 170. Installation tool handle adjustment
246
System x3650 M4 BD Type 5466: Installation and Service Guide
d. Install the microprocessor using the following instructions for your
installation tool.
v If using Installation Tool A, twist the handle on the microprocessor tool
assembly counterclockwise to the open position to insert the
microprocessor into the socket, and lift the installation tool out of the
socket.
v If using Installation Tool B, twist the handle of the installation tool
assembly counterclockwise until the microprocessor is inserted into the
socket, and lift the installation tool out of the socket. The following
illustration shows the tool handle in the open position.