How To Process [Ppi] Mail - Neopost IN-700 User Manual

| Page 56 | Nov-19-2015 01:43 |
Processing [PPI] Mail
To run mail, follow the procedure below after you have completed the sequence in
Set Postage for [PPI] Mail

How to Process [PPI] Mail

3
In Standard weighing mode (
postage directly on mail pieces:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2. Press . The system motors start running.
3. Withdraw the envelope from the WP and insert it into the mail path against the
rear-guide wall, side to be printed facing upwards.
4. The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
56
on page 54.
). From the [Standard] home screen, to print
If mail piece is bigger than mail path maximum thickness (see
Specifications on page 265), press
to print a label. The label is printed at once.
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
How to
Mail
before you press