How To Modify An Existing Operator - Neopost IN-700 User Manual

| Page 134 | Nov-19-2015 01:43 |

How to Modify an Existing Operator

To modify an existing Operator:
1. As supervisor (see
Press
The Manage Operator Wizard window opens.
5
2. Select Operator List.
3. Select the operator and select Edit / Del..
4. Select Edit / Modify.
The Edit / Modify screen is displayed.
5. Change the operator options as needed and press [OK] to display the Operator
modification summary screen (Use key [C] to clear characters).
6. Press [OK] to accept your changes.
Assigning Accounts to Operators
You can define the Accounts Access to each operator, by assigning accounts, groups or
subgroups of accounts to the operator.
Assigning a group (or subgroup) automatically assigns all the accounts of the group.
134
How to Log in as Supervisor
and select the path: Account management
If you assign a group (or subgroup) to an operator, all accounts you
will add afterwards to the group will be automatically assigned to
the operator.
On user screens, only accounts are displayed. Groups and
subgroups are only visible to the supervisor.
on page 182):
Manage operators