How To Select A Ppi - Neopost IN-700 User Manual

| Page 72 | Nov-19-2015 01:43 |

How to Select a PPI

To select a PPI:
1. As a user:
Check that you are in the [PPI] type of stamp.
3
If not, see section
Tap the PPI zone on the home screen
or
Press
The Select PPI screen is displayed.
2. To select a PPI on that screen, you can:
- Type the PPI number.
- Select the PPI using the arrows.
3. Press [OK] to validate your selection and return to the Built stamp/imprint screen.
72
Selecting the Type of Stamp
on the keyboard and then select PPI number.
on page 35.