Printing [Standard] Mail; How To Set Postage For [Standard] Mail - Neopost IN-700 User Manual

| Page 39 | | Nov-19-2015 01:43 |
3.3

Printing [Standard] Mail

In Processing [Standard] Mail Section
This section describes the parameter settings and mail handling sequences for the mailing
processes that use the Type of stamp [Standard], to apply postage using different rates.
See also
• About the use of the Type of stamp, see
Applying Postage for [Standard] Mail
Setting Postage for [Standard] Mail
The procedure below outlines steps in a recommended sequence to process your mail.
• As mail requirements quickly vary, some settings may not be necessary, or their
order may vary.
• You must begin with selecting the Type of stamp to gain access to the additional
options and be able to run your mail (standard is default).
Make sure you have already completed the preparation steps
mentioned in
31.

How to Set Postage for [Standard] Mail

Required settings:
1. Make sure you are on the home screen of the [Standard] type of stamp.
The type of stamp is indicated at the top of the home screen as illustrated below.
Choosing a Type of Stamp
Preparing and Starting your Work Session
3
on page 29.
on page
39