| Page 53 | Nov-12-2015 10:25 |
Processing [PPI] Mail
To run mail, follow the procedure below after you have completed the sequence in
Set Postage for [PPI] Mail
How to Process [PPI] Mail
In Standard weighing mode (
directly on mail pieces:
1.
Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Press
. The system motors start running.
If the Smart Start function is activated, the motors start automatically
when you withdraw the mail piece from the weighing platform. To
enable Smart Start, see
on page 162.
3.
Withdraw the envelope from the WP and insert it into the mail path against the
rear-guide wall, side to be printed facing upwards.
If mail piece is bigger than mail path maximum thickness (see
Specifications
to print a label. The label is printed.
4.
The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
on page 51.
). From the [Standard] home screen, to print postage
How to Activate / Deactivate Smart Start
on page 231), press
How to
Mail
before you press
53
3