How To Process Ppi Mail (Running Mail) - Neopost IS-440 User Manual

How to Process PPI Mail (Running Mail)

How to Process
PPI Mail
(Running Mail)
Standard weighing
In
screen, to print postage directly on mail pieces:
1
Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the
of the screen and the postage amount is updated.
2
Press . The system motors start running.
If the Smart Start function is activated, the motors start automati-
cally when you withdraw the mail piece from the weighing plat-
form. To enable Smart Start, see
Smart Start
p.147.
3
Withdraw the envelope from the WP and insert it into the mail
path against the rear-guide wall, side to be printed facing
upwards.
If mail piece is bigger than mail path maximum thickness (see
Mail Specifications
p.215), press
print a label. The label is printed.
4
The Mailing System applies postage and the mail piece (or
label) is sent to the catch tray.
Otherwise, if you want to print several identical labels:
1
Press and enter the number of labels.
Make sure the labels are available in the Label Dispenser
Filling the Label Dispenser
(see
2
Press to print the labels.
mode ( ). From the [Normal ] home
How to Activate / Deactivate
before you press
p.74).
Weight
area
3
to
51