| Page 202 | Nov-19-2015 01:43 |
8.9
Postage Imprint Default Set-
tings
The settings of the postage imprint 'by default' include:
• Stamp default settings: sets the default rate, ERA and ad die for mailing operations
• Automatic Date Advance: enables early date change to continue printing postage
with the new date after post office closing hours
• Printing offset: sets the default offset print position from the right side of the envelope.
Stamp Default Settings
You can set default parameters for the stamp elements that follow:
• Rate
• Prepaid imprint
8
• ERA
• Ad Die
On list screens, a mark
Changing the Default Rate
Use the procedure below to change the rate the machine activates at start-up.
How to Change the Default Rate
To change the default rate:
1.
As supervisor (see
Press
parameters
2.
Select the default rate using the rate wizard.
3.
Press [OK] to validate.
See also
•
Managing Postal Rates
202
indicates the default parameter.
How to Log in as Supervisor
and select the path:
Default user settings
Default rate
on page 228
on page 182):
Default imprint