Neopost IN-700 User Manual page 64

| Page 57 | Nov-19-2015 01:43 |
Otherwise, if you want to print several identical labels:
1.
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see
Dispenser on page 91).
2.
Press to print the labels.
In Differential weighing mode (
From the [PPI] home screen, to print postage on mail pieces:
1. Place the stack of mail you want to process on the weighing platform, and then follow
the instructions on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the stamp, insert the mail piece into the base against the rear-guide wall, side
to be printed facing upwards.
If mail piece is bigger than mail path maximum thickness (see
Specifications
to print a label. The label is printed at once.
4. The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
):
on page 265), press
Filling the Label
Mail
before you press
57
3