| Page 244 | Nov-19-2015 01:43 |
Adjusting the Sealing Water Flow
Before you adjust the sealing water flow, make sure that the brushes and sponge are clean
(see
How to Clean the Brushes and Sponge Sealer
How to Adjust the Sealing Water Flow
To adjust the sealing water flow:
1.
Set the water flow using the back lever.
When standing in front of the feeder:
10
- Push the lever towards the left-hand side to increase the water level.
- Push the lever towards the right-hand side to decrease the water level.
244
on page 245).