Table of Contents
Advertisement
| Page 247 | Nov-19-2015 01:43 |
Cleaning the Feeder Belts and Rollers
Follow the steps below to clean the belts and rollers of the feeder and of the Dynamic Scale
(if installed).
How to Clean the Feeder Belts and Rollers
To clean the feeder belts and rollers:
1.
Open equipment covers; in the Mixed-Size Feeder, press the left of the upper blue
handle to release and lift up the drive assembly.
2.
Clean the belts and/or rollers with a damp cloth or 70° alcohol on a cotton applicator.
3.
Push down the upper drive assembly until it locks back into position and close the
feeder cover.
Cleaning Mail Path Sensors
The sensors are light sensitive devices successively covered by the envelopes during their
travel along the mail path.
Clean the mail path sensors as indicated below on system base, feeder, and optional
dynamic scale.
10
247
Advertisement
Chapters
Table of Contents
