Connection Settings; How To Set The Postal/Online Services Connection - Neopost IN-700 User Manual

| Page 211 | | Nov-19-2015 01:43 |
8.12

Connection Settings

Connection to the Postal Services or Online Services
To add funds or access Online Services, the Mailing System can use the following networks:
• An Internet access through a high speed LAN (Local Area Network).
First use the procedure below to select the connection, then configure the connection.
LAN settings can only be performed if the machine was actually
connected to the LAN at power-up.
See also
• To physically connect the LAN to the base, see

How to Set the Postal/Online Services Connection

To set the postal/Online Services connection:
1. As supervisor (see How to Log in as Supervisor
Press and select the path:
tion
The Server Access screen is displayed.
If you did not have the LAN plugged into the system, you will get a
warning message.
Please follow the message: check your communication cable or
device and press OK.
2. Select Server access.
3. Select LAN.
4. For LAN settings, see
See also
• To physically connect the LAN to the base, see
Communication settings
How to Set LAN (High-speed Internet) Parameters
Connection Diagram on page 22.
on page 182):
Type of connec-
on page 212.
Connection Diagram on page 22.
8
211