4.
ENTERING
PROCESSING
4.1 Entering postage value
4.1.1 Manually
C
Press key
if a value different from zero is displayed and enter the
postage value required, using the numeric keys. In case of error, press
C
. When a dynamic scale is present, mode transport should be
selected to print on envelope.
4.1.2 With an external scale
Place a mail item on the external scale and press "Set Meter" or
"Print Tape" to transmit the calculated value to the franking machine.
When a dynamic scale is present, mode transport should be
selected to print on envelope.
4.1.3 With a dynamic scale
Do not lean on or disturb the system while it is processing
in the dynamic weighing mode; it will affect the amount
of postage applied to the mail.
- From the main screen, press on
displayed; press on
of the dynamic scale"), using arrows
press on
OK
- Press on
NEXT
the screen below appears:
RATE
MENU
where:
POSTAGE
to select a mode (see section "Use
SCALE
to confirm the selection.
, until
is displayed; press on
RATE
0 USER RATE
1 2nd Class
2 Inland 1st Class Rec
3 2nd Class Recorded
4 Spec Del 2500
5 Eu Air Letters
6 OSEu Air Let Z1
MORE
Entering Postage Value and Mail Processing 31
VALUE
AND
, until
NEXT
and
OK
MAIL
is
SCALE
, and
;
RATE