Printing Incoming Mail With [Received] Mode; How To Set [Received] Mode Printing - Neopost IN-700 User Manual

| Page 61 | | Nov-19-2015 01:43 |
3.5 Printing Incoming Mail with
[Received] Mode
In [Received] Mode Section
This section describes how to use the [Received] type of stamp, to:
• Print the date on incoming mail, and/or
• Print 'Received' on incoming mail
See also
• About the use of the Type of stamp, see
Setting [Received] Mode printing
The procedure below outlines steps required to stamp incoming mail.
You must begin with selecting the Type of stamp to gain access to the corresponding
parameters and be able to run mail.
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session

How to Set [Received] Mode printing

Required settings:
1. Make sure you are on the home screen of the [Received] type of stamp.
The type of stamp is indicated at the top of the home screen as illustrated.
Choosing a Type of Stamp
on page 31.
3
on page 29.
61