Neopost IN-700 User Manual page 52

| Page 45 | Nov-19-2015 01:43 |
4. The Mailing System prints postage and the mail piece (or label) is sent to the catch
tray.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
If you want to print several identical labels:
1.
Press and enter the number of labels.
Make sure there is enough labels are available in the label dispenser (see
Label Dispenser on page 91).
2.
Press to print the labels.
In optional mode Differential Weighing (
From the [Standard] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the instructions
on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the stamp, insert the mail piece into the base against the rear-guide wall, with
the side to be printed facing upwards.
If a mail piece is bigger than mail path maximum thickness, press
thickness, see
):
to print a label. The label is printed. To know the maximum
Mail Specifications
Filling the
on page 265.
3
45