How To Add Or Delete Ppis - Neopost IN-700 User Manual

| Page 231 | Nov-19-2015 01:43 |
Adding or Deleting PPIs
You can add PPIs to the machine using an USB memory key as follows.

How to Add or Delete PPIs

To add a PPI:
1. Display the list of PPIs (see
2. Select Add new and connect the memory device to an USB port of the machine
(on your left hand side at the rear of the base: see
3. Press [OK]. The USB memory key content is displayed.
4. Select a PPI to load into the machine an press [OK].
The PPI list is updated with the new PPI.
To delete a PPI:
1. Select the PPI to delete and press [OK].
2. Confirm deletion.
The system updates the PPI list.
How to Display the List of PPIs
Connectors
on page 230).
on page 20).
231
9