Neopost IN-700 User Manual page 53

| Page 46 | Nov-19-2015 01:43 |
4. The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
3
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press
In optional mode Differential Weighing Automatic Label (
From the [Standard] home screen:
1. Place the stack of mail you to process on the weighing platform, and then follow the
instructions on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen, starts motors and prints the label
automatically.
3. Repeat the previous step for each piece of mail.
To quit the process at any time, press
46
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can answer
Yes or No.
If you inadvertently remove more than one item from the WP,
replace removed items on WP before weight stabilization to
avoid printing label (about 1.5 seconds).
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can answer
Yes or No.
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
.
):
.