Neopost IN-700 User Manual page 43

| Page 36 | Nov-19-2015 01:43 |
Frequently Asked Questions
System check list:
Question...
Do I have enough postage?
3
Do I need to clear the Batch
Counter?
Is the sealing/moistening device
properly filled?
(if installed)
Is the Weighing Platform properly
zeroed or tared?
Are labels in place in the ALD?
(if you plan to print on tape)
Is there enough ink in the cart-
ridge?
36
Answer
Look at the funds counter at the bottom of the screen,
or:
Press
To add funds, see
(Meter) on page 97.
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see
Report on page 148).
Select Reset counter on the home screen, or
See How to Reset Batch Counters
For sealing while printing the envelopes.
For sealer-equipped feeders, see
Sealer Bottle
Before laying envelope(s) on the weighing platform,
your home screen should display 0 g. If _ g is dis-
played, perform a 'rezero' of the WP.
See How to Rezero the Weighing Platform
197.
See How to Fill the Automatic Label Dispenser
page 91.
To display the level of ink in the printing headset, see
How to Display Ink Level and Cartridge Data
236.
You can be warned when the available funds gets below a preset
value (see How to Set the Low-Funds Threshold
and enter 1 to check your funds balance.
How to Add Funds to the PSD
on page 90.
How to Fill the
on page 243.
on page 192).
Batch Data
on page
on
on page