| Page 115 | | Nov-19-2015 01:43 |
5.4
Selecting an 'Account Mode'
See also
•
Guidelines to Setup an Account
How to Display and Change the 'Account Mode'
To display and change the 'Account mode':
1.
As supervisor (see
How to Log in as Supervisor
Press
and select the path:
Selection
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
2.
Select another 'Account mode'.
3.
Press [OK] to confirm.
4.
If required, enter the PIN code and press [OK].
The Mailing System then confirms that the 'Account Mode' has been changed.
If you have selected the 'Remote account management' Mode, a
connection process to the PC application begins. If the connection
fails, the previous account mode remains active.
on page 109.
on page 182):
Account Management
5
Account Mode
115