Time And Date Management; How To Check/Adjust The Machine Time And Date - Neopost IN-700 User Manual

| Page 213 | | Nov-19-2015 01:43 |
8.13

Time and Date Management

Daylight Savings Time Transitions
Your Mailing System normally auto-adjusts to Daylight Savings Time. However, if a manual
adjustment is necessary, you can use either of the following procedures to correct the
Mailing System time:
• As a user: How to Unlock the PSD
• As supervisor:

How to Check/Adjust the Machine Time and Date

Time and Date Setup
Time and date are required for postage and are provided by the postal authorities. As a
result, you cannot manually adjust the system time and date.
However, you can ask the system to check the current time and date and display them.
See also
• Automatic Date Advance
To check the time and date, make sure the connection to the Postal
Services is available. See
Connection
How to Check/Adjust the Machine Time and Date
To check/adjust the current time and date:
1. As supervisor (see How to Log in as Supervisor
Press and select the path:
If you are processing postage at the time when the system clock
adjusts for daylight savings time, the Mailing System will wait until
you are finished before displaying the new time.
2. Select Audit call to adjust the time.
The system adjusts its time if necessary and displays time and date values.
on page 100
on page 205.
How to Set the Postal/Online Services
on page 211.
on page 182):
System settings
on page 213
Date and time
213
8