| Page 250 | Nov-19-2015 01:43 |
10.5
Performing the Update Registration Procedure to Change
your Address
This procedure is to be used if you have changed address.
First contact your Customer Service to update your details, then you will be instructed to
perform the update registration procedure by the USB key you will be sent.
Updating Registration
Check that your Mailing System is connected to the network before starting.
How to Run the Registration Update
10
To run the registration update:
1.
As supervisor (see
Press
A confirmation message is displayed.
2.
Press [OK].
3.
Select Update registration.
4.
Connect your USB memory key and press [OK].
5.
Select the new town die and press [OK].
The update registration processes is finished and your new zip code will print in the
postal imprint.
6.
When required, type your registration PIN.
7.
Press [OK] to start the connection to postal services.
8.
Press
250
Maintenance Processes
How to Log in as Supervisor
and select the path:
after the call is completed.
on page 182):
Maintenance
Processes