How To Process [Manual Amount Entry] Mail - Neopost IN-700 User Manual

| Page 52 | Nov-19-2015 01:43 |
You are now ready to print.
Processing [Manual Amount Entry] Mail
3
To run mail, follow the procedure below after you have completed the sequence in
Set Postage for [Manual Amount Entry] Mail

How to Process [Manual Amount Entry] Mail

The postage amount is displayed on the home screen. To print postage directly on
mail pieces:
1. Insert the envelope (or label) into the mail path against the rear-guide wall, with the
side to be printed facing upwards.
52
When you are in the manual amount entry mode, you can modify
the amount by typing the amount with the keypad. You can reset
the value by pressing [C].
on page 49.
The side that you want to print on should be facing upwards.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications on page 265), you may print on a label instead.
How to