Neopost IN-700 User Manual page 67

| Page 60 | Nov-19-2015 01:43 |
In other modes (Manual weight entry
screen, to print postage on mail pieces:
1.
Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall, side to be printed
3
facing upwards.
The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
Otherwise, if you want to print several identical labels:
1.
Press
Make sure the labels are available in the label dispenser (see
Dispenser on page 91).
2. Press to print the labels.
60
If mail piece is bigger than mail path maximum thickness (see
Specifications on page 265), press
to print a label. The label is printed at once.
and enter the number of labels.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
, No weight source). From the [PPI] home
before you press
Filling the Label
Mail