How To Change The Geo Code - Neopost IN-700 User Manual

| Page 199 | Nov-19-2015 01:43 |
GEO Code
The Weighing Platform calculates mail piece weights that have to be corrected according
to the geographical location of the Mailing System, as weights can change with the altitude
and latitude. The correcting geodesic code may be entered:
• Automatically with Online Services
• Manually
Changing GEO code
To change the GEO code manually, follow the steps below.
Changing the GEO code modifies the weight values the Mailing
System calculates. Make sure you enter the correct GEO Code to
ensure your weights bare accurate.

How to Change the GEO Code

To change the GEO code:
1. As supervisor (see How to Log in as Supervisor
Press and select the path:
settings GEO code
2. See the map and table on the next pages to get the 5 digit GEO code from your location
altitude and latitude, and enter the 5 digit using the keypad.
3. Press [OK] to validate.
on page 182):
System settings Accessories and module
8
199