Data Sending/File Sharing Problems And Remedies - Canon imageRUNNER 105 Network Manual

Data Sending/File Sharing Problems and
Remedies
The following describes how to resolve data sending/file sharing problems.
Unable to Send Data/Share Files (FTP)
Cause 1 : The FTP server is not set correctly.
Remedy : Perform the following steps to check the server status. (If you are using
8
NOTE
•
If the above are confirmed and file sharing still does not operate normally, consult the
network administrator for the environment you are using.
Cause 2 : The machine's address [User] setting contains one or more spaces after the
Remedy : Ensure that the machine's address [User] setting does not contain spaces after
Cause 3 : The machine was turned to OFF while sending data to the FTP server, and
Remedy : If power to the machine is turned to OFF while data is being sent to the FTP
8-10

Data Sending/File Sharing Problems and Remedies

Windows, perform these steps from the MS-DOS prompt.)
•
Example using UNIX, where the FTP server has the IP address 192.168.1.195
U:>ftp 192.168.1.195
Connected to 192.168.37.195.
220 canmfs FTP server (UNIX(r) System V Release 4.0) ready.
User (192.168.37.195:(none)): user_name
331 Password required for user_name.
Password: *Enter password
230 User user_name logged in.
ftp> cd /export/share
250 CWD command successful.
ftp> bin *Set data transfer type (binary)
200 Type set to I.
ftp> put sample.tif
ftp> by *Cut off server connection
221 Goodbye
User name.
the User name.
when the machine was turned back to ON, it attempted to resend the data.
(When a Windows NT/2000 FTP server is being used.)
server, the FTP server may hold the data in a writing-in-progress state.
Therefore, this data cannot be overwritten even when the machine re-connects
*Connect to server
*Move to data destination directory
*Set transfer file name for verification
*User login