Enhanced phone functions
User
Configuration
Connected calls
Hold and hang-up
Yes
No
Save & Exit
Activating/deactivating Hold and hang-up
This function works in the following call scenarios:
• You have placed a call on hold and hang up.
• You are conducting a consultation call and the second party hangs up.
• You have answered a second call and you or the second party hangs up.
You can use "Hold and hang-up" to determine whether you will be prompted im-
mediately or after a defined time to retrieve the held call.
This function cannot be used on multi-line phones.
z
You can also configure this setting via the WBM interface
Press the key shown until "Settings" is active.
Services
Confirm the option shown.
j
Enter and confirm the user password.
if nec.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu to activate the function
or
Select and confirm the option shown to deactivate the function again. The func-
tion is always deactivated by default.
Select the softkey to confirm.
105
Page 247.