Logging On At Different Telephones; Logging On With Forced Logoff At A Remote Phone; Logging On With Forced, Delayed Logoff At A Remote Phone - Unify OpenScape Desk Phone IP 55G User Manual

178
Mobile logon
Mobility ID
Enter password
Mobile logon
Mobility ID

Logging on at different telephones

An attempted logon is rejected if the user is already logged on to another phone
and "Logon with forced logoff" is disabled for the mobility user.

Logging on with forced logoff at a remote phone

If the user is already logged on at another phone and the remote phone is busy,
the logon is rejected.
If, however, your administrator enabled "Forced logoff during call" without setting
a time, the system does not consider whether or not the remote phone is busy.
Logon via a key
If a program key is configured for Mobility.
Press the "Mobility" program key.
Logon via the context menu
or
Select the softkey in idle mode
You are prompted to enter your mobility ID. 
j
Enter and confirm mobility ID – usually a phone number.
You are prompted to enter the password.
j
Enter and confirm the user password.
The following mobility messages appear in the display:
• Validating
• Logging off elsewhere
• Registering
• Downloading user data
The logoff is simultaneously displayed on the remote phone. Once logon is com-
plete, the "Mobility" program key LED lights up and the mobility icon appears on
the graphic display
Logging on with forced, delayed logoff at a remote
phone
If the remote phone is busy and your administrator enabled "Forced logoff during
call" with a set timeout, forced logoff does not occur until this timeout expires.
Logon via a key
If a program key is configured for Mobility.
Press the "Mobility" program key.
Logon via the context menu
or
Select the softkey in idle mode
You are prompted to enter your mobility ID. 
Page 29 to confirm.

.
Page 29 to confirm.

Mobility function