Accepting A Call Via The Headset - Unify OpenScape Desk Phone IP 55G User Manual

50 Basic functions
Suggestions for using speakerphone mode:
• Tell the other party that speakerphone mode is active.
• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is
50 cm.

Accepting a call via the headset

Prerequisite: A headset is connected.
Make sure your headset port is set up properly Page 221.

Answering calls via the headset key
The phone rings. The Headset key flashes.
Press the key shown.
Headset
Adjust the call volume Page 22.
if nec.
Vol.- Vol.+ 
Answering calls automatically via the headset
Prerequisite: The administrator has additionally configured a key with the "Au-
to-Headset" function (AICS Zip tone) ( Page 92).

Press the "Auto-Headset" function key to activate automatic call answering. This
key and the headset key illuminate.
A short acoustic signal is heard on the headset for a call and the connection is
established.
If you want to manually answer calls again, deactivate the automatic answering
function using the "Auto-Headset" key. Both keys are off.